What width is a 50 Ω trace?

On FR-4 with 1 oz copper, a 50 Ω microstrip is a little under twice as wide as the dielectric between the trace and its ground plane: 0.17 mm over 0.1 mm, 0.37 mm over 0.2 mm, and 2.98 mm on a 1.6 mm 2-layer board. A 50 Ω stripline between two planes 0.2 mm away is 0.17 mm wide.

The width is set by the dielectric height first, then by the dielectric constant, the copper thickness and the solder mask. On 0.2 mm of dielectric, εr 3.5 gives 0.42 mm and εr 4.8 gives 0.33 mm, so use your fabricator's stackup rather than a rule of thumb.